Sheet Metal Stamping: Clean Surfaces for Flawless Productions

Request Information

Inside sheet metal stamping plants, even minimal contamination can compromise the quality of subsequent processes. Metal residues, oils, and processing particles represent a constant risk for painting, surface treatments, and assemblies. Teknox parts washing machines allow guaranteeing deep and controlled cleaning, improving component efficiency and production process stability.

Teknox Metal Washers for Sheet Metal Stamping

K-NUT

Immersion washing system

Up to 125 x 65 x H200 cm

Up to 600 kg

Up to 80 °C

LINEARJET

Metal parts washer with mobile nozzle for bulky, very narrow and long parts

Based on needs

Up to 80° C

P MEDIUM

Automatic parts washer with rotating basket and electromechanical commands

Up to Ø 117 x H 70 cm

Up to 300 kg

Up to 60 °C

P SMALL

Parts washers with rotary basket and electromechanical commands

Up to Ø 78 x H 43 cm

100 kg

Up to 60 °C

ROBUR

Automatic rotating-basket metal washer for large volumes and weights

Up to Ø 225 x H 100 cm

Up to 800 kg

Up to 80 °C

ROBUR 2B

Automatic rotating-basket metal washer with double tank

Up to Ø 225 x H 100 cm

Up to 800 kg

Up to 80 °C

ROBUR 3B

Automatic rotating-basket metal washer with three baths

Up to Ø 225 x H 100 cm

Up to 800 kg

Up to 80 °C

ROTOR 1B

Automatic spray and hydrokinetic immersion metal washer

Up to 75 x 100 cm

Up to 100 kg

Up to 80 °C

ROTOR 2B

Automatic spray and hydrokinetic immersion metal washer with double tank

Up to 75 x 100 H 75 cm

Up to 100 kg

Up to 80 °C

ROTOR 3B

Automatic spray and hydrokinetic immersion metal washer with triple tank

Up to 75 x 100 H 75 cm

Up to 100 kg

Up to 80 °C

ROUNDJET

Turntable parts washer for small sized parts in a short time

Based on needs

Up to 60 kg

Up to 80 °C

SERIE K

Ultrasonic metal washer for heavy and continuous use

Up to 125 x 65 x H55 cm

Up to 300 kg

80 °C

SIMPLEX BIG

Automatic rotating-basket metal washer with plc and touchscreen

Up to Ø 240 x H 100 cm

Up to 800 kg

Up to 80 °C

SIMPLEX BIG 2B

Automatic rotating-basket parts washer with double tank

Up to Ø 240 x H 100 cm

Up to 800 kg

Up to 80 °C

SIMPLEX MEDIUM

Automatic rotating-basket metal washer for medium and large size parts

Up to Ø 117 x H 70 cm

Up to 300 kg

Up to 80 °C

SIMPLEX SMALL

Automatic rotating-basket metal washer for mechanical parts

Ø 78 x H 43 cm

100 kg

Up to 80 °C

TUNNEL L

Linear multi-stage plant parts washer for continuous industrial washing

Based on needs

Up to 80 °C

TUNNEL O

Oval multi-stage plant parts for continuous industrial washing

Based on needs

Up to 80 °C

TUNNEL U

“U-shaped” multi-stage plant for continuous industrial washing

Based on needs

Up to 80 °C

TWISTER

Spray metal washer with continuous rotation on basket

Crate 30 x 45 x H30 cm

80 kg

Up to 80 °C

UNIX

Automatic rotating-basket metal washer with rear tank

Up to Ø 117 x H 70 cm

Up to 300 kg

Up to 80 °C

UNIX 2B

Automatic rotating-basket metal washer with double rear tank

Up to Ø 117 x H 70 cm

Up to 300 kg

Up to 80 °C

Choose custom solutions

Contact Teknox to design industrial washing systems adequate to your company’s needs: bring efficiency and quality to maximum levels.

Request Information

Targeted Industrial Washing for Treatment of Stamped Sheet Metal

In the sheet metal stamping sector, the washing phase is an integral part that determines final product quality. After mechanical deformation, surfaces are often contaminated by greases, oils, and metal residues. These elements, if not adequately removed, can cause aesthetic defects, poor coating adhesion, or problems during subsequent treatments, including galvanization, phosphating, or painting. Designed to guarantee uniform and controlled cleaning on sheets of different sizes and materials, Teknox industrial washing systems effectively intervene on:

oily residues and lubricants from stamping;
metal microspheres and processing scales;
contaminants from handling and storage.

Using washing machines produced by Teknox, which allow precise control of washing parameters such as temperature, pressure, and detergents, it is possible to obtain surfaces perfectly prepared for subsequent processing.

Advantages of Teknox Solutions in Sheet Metal Stamping

Implementing a Teknox industrial washing system allows companies engaged in sheet metal stamping to obtain concrete benefits, including:

constant surface quality;
reduction of scraps and reworks;
greater production continuity, with reduced machine downtime;
protection of systems and molds, less subject to deterioration and residue accumulation;
optimization of operating costs;
compliance with safety and environmental requirements, thanks to solutions designed to minimize waste and environmental impact.

Custom Systems for Every Stamping Line

Teknox proposes personalized solutions, designed specifically to respond to the real needs of the customer engaged in sheet metal stamping: volumes, piece dimensions, and required cleaning levels. Solutions can include automatic loading and unloading systems, optimized cycles, and high energy efficiency technologies. The Teknox approach, not standardized, allows for realizing solutions born from in-depth technical analysis, so that it is possible to offer the maximum in terms of performance, efficiency, and duration over time. Discover the lines of metal washing machines proposed by Teknox, entirely produced and certified in Italy: contact technicians for a custom consultation.

Choose custom solutions

Contact Teknox to design industrial washing systems adequate to your company’s needs: bring efficiency and quality to maximum levels.

Request Information

Choose washing systems that make a difference: rely on Teknox

Technical competence, innovation, and Made in Italy at the service of your processes.