Recently, Teknox delivered the Robur 1800 with 3 baths, an ideal solution for washing large and heavy mechanical components.
The technical features and the proposed washing process proved to be essential for ensuring:
- High-quality standards during all treatment stages, certified by the surface tension control;
- Increased productivity of the processing line;
- Reduction of consumption and management costs;
- Reduced manual intervention due to the high automation of the system;
- Improved quality of the finished product, resulting in an increase in the product’s commercial value.
In particular, the Robur system is capable of treating large components thanks to its octagonal grid with a diameter of 1800, a washing height of 1 meter, and an exceptional load capacity of 2 tons.
The cycle times for such complex components do not exceed 15 minutes and are structured as follows:
- Phosphodegreasing: 4 minutes
- Rinsing: 3 minutes
- Rinsing with demineralized water: 3 minutes
- Blowing with compressed air and booster drying with hot air: 5 minutes
The optimal treatment is achieved thanks to the Deterfos phosphodegreaser developed by Teknox, expertly combined with the action of pumps capable of performing high-pressure and high-flow treatments.
The latest technologies for managing and controlling liquids allow for maintaining quality standards over time.
The 6 stages of filtration and ultrafiltration at 25 microns, along with the Disoil P non-soluble oil removal system designed by Teknox, help reduce consumption and increase maintenance frequency by up to 35%.
