K-NUT

Immersion washing system

The Teknox immersion washing system has been designed for heavy-duty and continuous use, thanks to the high quality of the materials and technologies employed. The treatment is carried out through immersion in heated liquid. The standard machine includes an automatic, high-capacity stainless steel mobile platform, an additional tank for oil collection by skimming, and a recirculation pump. The machine is available in the HT version (insulated, with an adjustable maximum temperature up to 80°C).

K Line

Request Information

Washing Area

Up to 125 x 65 x H200 cm

Loading Capacity

Up to 600 kg

Maximum Temperature

Up to 80 °C

Version

HT (heating up to 80° C)

Controls

Color touchscreen, Industry 5.0 Option

Tanks

Single tank up to 860lt

Power Supply

Detergent

CLEAN POWER, 545, ADD-SGX, SG233A, NEW 105, XL10, PROMETAL, PROTEK-IN, ADD-SGX, DROPAWAY, DETERFOS, PAINTSTRIPPER A3, PAINTSTRIPPER B1, CARK 211, DECARB SPECIAL, DECARB ULTRA, DEOXY, PUL-T

Features

Details

Accessories

Models

Standard features

Real-time automatic calculation of electricity consumption
Assisted lid closing with gas springs and locking hook
Tank thermal insulation
Siemens electrical power components
Minimum level control
4″ color touchscreen display for settings and programs
Aisi 304 stainless steel filter on the pump suction
Safety limit switch on lid opening
Automatic lifting and immersion platform
Adjustable feet +/- 50mm
Compressed air blow gun
Recirculation pump for filtration and oil removal by skimming
Weekly programming for heating and oil separator activation (if installed)
IP55 main electrical panel, managed via PLC touchscreen (DGT V4)
Liquid heating with stainless steel electric heating element
Pickling of internal and external welds
Structure and sheets in contact with the liquid made of AISI 304L stainless steel
Manual water filling valve
Drain valves for tank emptying
HT version

The Teknox immersion washing system has been designed for heavy-duty and continuous use, thanks to the high quality of the materials and technologies employed.

The treatment is carried out through immersion in heated liquid.

The standard machine includes an automatic, high-capacity stainless steel mobile platform, an additional tank for oil collection by skimming, and a recirculation pump. The machine is available in the HT version (insulated, with an adjustable maximum temperature up to 80°C).

Optional accessories available

Maximum liquid level control in tank 1 and filling solenoid valve
Remote connection and remote assistance device for Weintek HMI
Remote connection and remote assistance device for Siemens PLC
Automatic chemical dosing system, installed on tank 1
Stainless steel cartridge filter (10/25/50 microns)
Siemens KTP HMI – Display (only for Siemens PLC)
Machine equipped with wheels for movement [D]
Siemens S7 1200 PLC – Weintek touchscreen HMI
Tank emptying pump (2)
Industry 4.0 ready for Weintek HMI
Industry 4.0 ready for Siemens PLC
Industry 5.0 ready (Energy counter)
Provision for the use of abrasive contaminants in the washing liquid
Stainless steel fittings and valves in contact with the liquid (KIT FC)
Heating with external elements, not in contact with the liquid
Detergent suction tank for automatic dosing system
3-light LED signal tower and acoustic alarm
AISI 304L stainless steel drip retention tray [D]

Model	Washing area (cm)	Noise level HT (RU_HT)	Loading capacity	Tank capacity
K100_NUT	65 x 35 x H 40	70 dBa	100 Kg	290 lt
K200_NUT	85 x 45 x H 40	70 dBa	100 Kg	430 lt
K300_NUT	105 x 55 x H 45	70 dBa	300 Kg	657 lt
K500_NUT	125 x 65 x H 45	70 dBa	300 Kg	860 lt